Gestetner dsc224 Mode D'Emploi

Remote Maintenance by telnet

109

❒ To specify the TCP/IP protocol, type ip followed by a space, and then the

IP address.

❒ To specify the IPX/SPX protocol, type ipx followed by a space, and then

the IPX address followed by a decimal, and then the MAC address of the
Network Interface Board.

The following is an example of how to configure registration number 3 with
the IP address 192.168.15.16.
msh> snmp 3 ip 192.168.15.16
The following is an example of how to configure registration number 3 with
the IPX address 7390A448, and the MAC address 00:00:74:62:5C:65.
msh> snmp 3 ipx 7390A448:000074625C65

Use the ipp command to configure the IPP settings.

❖

❖

❖

❖ Viewing setting

The following command displays the current IPP settings.

msh> ipp
Example output:

• The “timeout” setting specifies how many seconds the computer keeps try-

ing to access the network printer to send print jobs when no connection can
be made.

• The “auth” setting indicates the user authorization mode.

❖

❖

❖

❖ IPP timeout configuration 

Specify how many seconds to wait before canceling a print job if it has been
interrupted for some reason. The range of time can be changed between 30 to
65535 seconds.

❖

❖

❖

❖ IPP user authorization configuration

Use the IPP user authorization to restrict users that can print with IPP. The de-
fault is “off” .

• “basic” and “digest” are user authorization setting.
• “off” removes the user's authorization.

❒ If you select “basic” or “digest”, see next section “Configuring the IPP User

Authorization” for how to configure the user name. Up to ten user names
are available.