Gestetner dsc224 Mode D'Emploi
11
1. Windows 95/98/Me
Configuration
Configuring Windows 95/98/Me
Note
❒ Windows 95/98 does not support IP over 1394.
Printing without a Print Server
The following procedure describes how to configure Windows 95/98/Me to use
the machine on a network without a Windows 2000 Server, Windows 2000 Pro-
fessional, Windows XP Server, Windows NT Server, Windows NT Workstation,
or NetWare based print server.
the machine on a network without a Windows 2000 Server, Windows 2000 Pro-
fessional, Windows XP Server, Windows NT Server, Windows NT Workstation,
or NetWare based print server.
AAAA
Specify the protocol to use.
Consult your network administrator about which of the three protocols is ap-
propriate.
• TCP/IP
• IPP
• NetBEUI
Consult your network administrator about which of the three protocols is ap-
propriate.
• TCP/IP
• IPP
• NetBEUI
BBBB
Configure the chosen protocol.
• See p.12 “Configuring TCP/IP and IPP for Printing”.
• See p.13 “Configuring NetBEUI for Printing”.
• See p.12 “Configuring TCP/IP and IPP for Printing”.
• See p.13 “Configuring NetBEUI for Printing”.
CCCC
Install the software and set the printer driver port.
• Install SmartNetMonitor for Client from the CD-ROM labeled “Printer
• Install SmartNetMonitor for Client from the CD-ROM labeled “Printer
Drivers and Utilities”. For more information about how to install the soft-
ware and how to specify the printer driver port, see the Printer Reference 1.
ware and how to specify the printer driver port, see the Printer Reference 1.
Printing with a Windows 2000/XP or Windows NT Print Server
See p.20 “Setting Up a Client Computer” for configuring Windows 95/98/Me
with a Windows 2000/XP or Windows NT print server.
with a Windows 2000/XP or Windows NT print server.