Gestetner dsc224 Mode D'Emploi
Windows 2000 Configuration
32
2
Configuring LPR Port Printing
This section explains the procedure for printing to a LPR port from Windows
2000.
2000.
Note
❒ The TCP/IP protocols must be installed and configured correctly. For more
information about configuring the protocols, see p.25 “Configuring TCP/IP
and IPP for Printing”.
and IPP for Printing”.
AAAA
Click [Start], point to [Settings], and then click [Printers].
The [Printers] window appears.
The [Printers] window appears.
BBBB
Click the icon of the printer you want to use. On the [File] menu, click [Prop-
erties]
erties]
.
CCCC
Click the [Ports] tab and click [Add Port].
DDDD
In the [Available port types] box, click “LPR Port”, and then click [New Port].
Note
❒ If “LPR Port” does not appear, “Print Services for Unix” has not been in-
stalled. For more information about how to install “Print Services for Un-
ix”, see Windows 2000 Help.
ix”, see Windows 2000 Help.
EEEE
Type the IP address of the Network Interface Board into the [Name or address
of server providing lpd]
of server providing lpd]
box.
FFFF
Type “lp” into the [Name of printer or print queue on that server box], and then
click [OK].
click [OK].
GGGG
Click [Close].
HHHH
Make sure that the port name is displayed in the [Print to the following port(s)]
box and the check box is selected, and then click [OK].
box and the check box is selected, and then click [OK].