Gestetner dsc224 Mode D'Emploi
Windows XP Configuration
44
3
Configuring LPR Port Printing
This section explains the procedure for printing to a LPR port from Windows
XP.
XP.
Note
❒ The TCP/IP protocols must be installed and configured correctly. For more
information about configuring the protocols, see p.37 “Configuring TCP/IP
and IPP for Printing”.
and IPP for Printing”.
AAAA
Access the [Printers and Faxes] window from [Start] on the taskbar.
Windows XP Professional
A Click [Start], and then click [Printers and Faxes].
Windows XP Home Edition
A Click [Start], and then click [Control Panel].
B Click [Printers and Other Hardware].
C Click [Printers and Faxes].
B Click [Printers and Other Hardware].
C Click [Printers and Faxes].
BBBB
Click the icon of the printer you want to use. On the [File] menu, click [Prop-
erties]
erties]
.
CCCC
Click the [Ports] tab and click [Add Port].
DDDD
In the [Available port types] box, click “LPR Port”, and then click [New Port].
Note
❒ If “LPR Port” does not appear, “Print Services for Unix” has not been in-
stalled. For more information about how to install “Print Services for Un-
ix”, see Windows XP Help.
ix”, see Windows XP Help.
EEEE
Type the IP address of the Network Interface Board into the [Name or address
of server providing lpd]
of server providing lpd]
box.
FFFF
Type “lp” into the [Name of printer or print queue on that server] box, and then
click [OK].
click [OK].
GGGG
Click [Close].
HHHH
Make sure that the port name is displayed in the [Print to the following port(s)]
box and the check box is selected, click [Apply] and then click [OK].
box and the check box is selected, click [Apply] and then click [OK].