Gestetner dsc224 Mode D'Emploi
Setting Up a Client Computer
57
4
Setting Up a Client Computer
This section describes the procedures for setting up a client in a network that
uses Windows 2000/XP, Windows NT Server or Windows NT Workstation as a
print server.
When using a Windows 2000/XP or Windows NT print server, select a shared
printer on Windows 2000/XP or Windows NT.
uses Windows 2000/XP, Windows NT Server or Windows NT Workstation as a
print server.
When using a Windows 2000/XP or Windows NT print server, select a shared
printer on Windows 2000/XP or Windows NT.
Limitation
❒ When using a print server connected to the machine with SmartNetMonitor
for Client, you cannot use Recovery Printing and Parallel Printing.
❒ When using Windows XP as a print server, the client computer cannot receive
notification of print job completion.
Note
❒ This section assumes that the client has already been configured to communi-
cate with a Windows 2000/XP or Windows NT print server. Do not begin the
following procedure until the client has been set up and configured correctly.
following procedure until the client has been set up and configured correctly.
Use the [Printers] window to set up the printer.
AAAA
Click [Start], point to [Settings], and then click [Printers].
BBBB
Double-click the [Add Printer] icon.
This launches the Add Printer Wizard.
This launches the Add Printer Wizard.
CCCC
Click [Network printer server] and click [Next >].
DDDD
In the [Shared Printers] box, double-click the name of the computer used as
the print server.
The printers attached to the network are displayed.
the print server.
The printers attached to the network are displayed.
Windows NT 4.0
Windows 2000/XP or
Windows NT Print Server
Windows NT Print Server