Gestetner dsc224 Mode D'Emploi

NetWare 3.x, 4.x, 5/5.1- Advanced Settings

65

❒ This section assumes NetWare is functional and that the necessary environ-

ment for the NetWare Print Service is available.

❒ When using NetWare 4.x, 5/5.1, you should install the client software re-

leased from Novell in Windows, before running the NIB Setup Tool for con-
figuring in NDS mode or using Windows NT 4.0.

❖

❖

❖

❖ To use NetWare 5/5.1

• Use the printer as a print server. Do not use as a remote printer.
• If you use Pure IP, configure the machine to use the TCP/IP protocol. For more

information about how to make the settings, see the General Settings Guide.

❒ You can set up the print server using NDS or Bindery mode in NetWare 4.x,

5/5.1. The following procedure is for NetWare 3.x and for setting up the print
server using NDS mode in NetWare 4.1. When you set up the print server us-
ing Bindery mode, use the NIB Setup Tool Wizard. See p.61 “Quick Setup Us-
ing the NIB Setup Tool Wizard”.

❒ If you use Pure IP in NetWare 5/5.1, follow the procedure on p.70 “Using

Pure IP in the NetWare 5/5.1 Environment”.

AAAA

❒ When using NetWare 4.x, 5/5.1, log on the file server as an administrator

or an administrator equivalent.

BBBB

Reference
See p.60 “Running the NIB Setup Tool” .

CCCC

Click [Property Sheet] and click [OK].
The [NIB Setup Tool - Network board list] dialog box of the Network Interface
Board appears.

DDDD

EEEE

❒ If you do not know which Network Interface Board you are configuring,

see the network configuration page to check the MAC address (Network
Address).