Gestetner dsc224 Mode D'Emploi
NetWare Configuration
76
5
MMMM
Assign print queues to the created printer as follows:
NetWare 3.x
A From [Print Server Configuration Menu], select [Queues Serviced By Printer].
B Select the printer created in step
B Select the printer created in step
.
C Press the {{{{INSERT}}}} key to select a queue serviced by the printer.
Note
❒ You can select more than one queue at a time.
D Follow the instructions on the screen to make other necessary settings.
When you have finished the above steps, make sure that the queues are as-
signed.
signed.
E Press the {{{{ESC}}}} key until “Exit?” appears, and then select [Yes] to exit
PCONSOLE.
F Start the print server by typing the following from the console of the
NetWare Server.
If it is running, restart it after exiting it.
If it is running, restart it after exiting it.
❖
❖
❖
❖ To exit
CAREE: unload pserver
❖
❖
❖
❖ To start
CAREE: load pserver print_server_name
Note
❒ If the printer works as configured, “Waiting for job” appears.
❒ NetWare 3.x ends here.
❒ NetWare 3.x ends here.
NetWare 4.x, 5/5.1
A Click [Assignments], and then click [Add] in the [Assignments] group.
B In the [Available objects] box, click the queue created in step
B In the [Available objects] box, click the queue created in step
, and then
click [OK].
C Click [Configuration], and in the [Printer type] box, select [Parallel] using the
drop-down menu, and then click [Communication].
D Click [Manual load] in the [Communication type] group, and then click [OK].
E After checking the settings, click [OK].
E After checking the settings, click [OK].