Gestetner dsc224 Mode D’Emploi
Copying
18
2
Auto Start
Copy starts automatically when the
machine is ready for copy.
machine is ready for copy.
AAAA
Set the copy contents while
“Please wait.” is displayed.
“Please wait.” is displayed.
BBBB
Set the original.
CCCC
Press the
{{{{Start}}}} key.
The
{{{{Start}}}} key lamp will flash.
Interrupt Copy
Use this function if you wish to inter-
rupt a long copy job to make urgently
needed copies.
rupt a long copy job to make urgently
needed copies.
Limitation
❒ You cannot use the Interrupt Copy
function when scanning fax origi-
nals.
nals.
AAAA
Press the
{{{{Interrupt}}}} key.
The Interrupt indicator goes on.
When the originals stop scanning
A Remove the originals that were
being copied and place the
originals you wish to copy.
originals you wish to copy.
B Press the {{{{Start}}}} key.
The machine starts making your
copies.
copies.
C When your copy job is fin-
ished, remove your originals
and copies.
and copies.
D Press the {{{{Interrupt}}}} key again.
The Interrupt indicator goes off.
E When the display prompts
you, set the remaining origi-
nals again before interrupting.
nals again before interrupting.
F Press the {{{{Start}}}} key.
Note
❒ The interrupt copy job set-
tings will be restored and the
machine will continue copy-
ing from where it left off.
machine will continue copy-
ing from where it left off.
When the machine keeps
copying
copying
A Place the originals you wish to
copy.
B Press the {{{{Start}}}} key.
The machine stops the previous
original job and starts copying
your original.
original job and starts copying
your original.
C When copying is complete, re-
move your originals and cop-
ies.
ies.
D Press the {{{{Interrupt}}}} key again.
The Interrupt indicator goes off.
The interrupt copy job settings
will be restored and the ma-
chine will continue copying
from where it left off.
The interrupt copy job settings
will be restored and the ma-
chine will continue copying
from where it left off.
Original Beeper
The beeper sounds and an error mes-
sage is displayed when you leave
your originals on the exposure glass
after copying.
sage is displayed when you leave
your originals on the exposure glass
after copying.
Note
❒ ⇒ p.99 “Tone: Original remains”
UranosC1-ENcopyA_F1_FM.book Page 18 Friday, July 26, 2002 5:01 PM