Gestetner dsc224 Mode D’Emploi

Copying

When the

{{{{Two-color}}}} key is

selected

AAAA

Select either [Two Color] or [Red &
Black]

When [Red & Black] is pressed

A Press [OK].

When [Two Color] is pressed

A Press [Change Color Setting].
B Press [Black Portion], and then

select the color to be replaced
by black.

Note

❒ When selecting a color from

the user colors, press [User
Color]

C Press [Non-black Portion], and

then select the color to replace
the black color of the original.

D Press [OK].

Convert Colors

Copies by changing the color in the
original to a different color.

Note

❒ It is possible to specify up to 4

colors.

❒ The width of the color to be con-

verted can be adjusted in 5 levels.
If the color width is set to “Wider”
and red has been specified, colors,
which are close to magenta or or-
ange, will also be converted. The
color width can be adjusted in the
“User Tools”.

⇒ p.106 “Color Sen-

sitivity”

AAAA

Press the

{{{{Full Color}}}} key.

BBBB

Press [Edit/Color Creation].

CCCC

Press [Color Creation].

DDDD

Press [Convert Color].

EEEE

Select the color to be converted.

FFFF

Select the new color to be converted.

Note

❒ You can adjust the density of

each color in 4 levels, excluding
white.

❒ When you want to change the

converted color, press from
[Conversion 1]

to [Conversion 4]

and make the selection again.

❒ When changing between more than

two colors, repeat steps

D and E.

UranosC1-ENcopyA_F1_FM.book Page 26 Friday, July 26, 2002 5:01 PM