Gestetner dsc224 Mode D’Emploi
Image Adjustment
77
3
❒ Adjustments should be made
darker when darkening the
color of markers or highlight-
ers. However, as the color of
highlighters is difficult to re-
produce, the copy might not
come out depending on the
color or a different color
might be copied.
color of markers or highlight-
ers. However, as the color of
highlighters is difficult to re-
produce, the copy might not
come out depending on the
color or a different color
might be copied.
B Press [OK].
Adjusting the U.C.R.
A Adjust by pressing [Lighter] or
[Darker]
.
B Press [OK].
Adjusting the Text/Photo
Sensitivity
Sensitivity
A Press [T
T
T
TNext].
B Adjust by pressing [Text] or
[Photo]
.
Note
❒ Make sure to set to “Text”
when parts of the texts are
faded or are not clear. Set to
“Photo” when the outline of
photos becomes dark.
faded or are not clear. Set to
“Photo” when the outline of
photos becomes dark.
C Press [OK].
Auto Color Calibration
If a certain color is strong or the color
of the copy differs from the original,
adjust the yellow, magenta, cyan and
black balance.
of the copy differs from the original,
adjust the yellow, magenta, cyan and
black balance.
Note
❒ If “D Toner is almost empty” is
shown on the display panel, the
test pattern cannot be printed.
test pattern cannot be printed.
AAAA
Press the
{{{{User Tools/Counter}}}} key.
BBBB
Press [Maintenance].
CCCC
Press [Auto Color Calibration].
DDDD
Press [Start] on the “Copier Func-
tion”.
tion”.
EEEE
Press [Start Printing] and a test pat-
tern will be printed.
tern will be printed.
Note
❒ The test pattern will be printed
on an A4
K, 8
1
/
2
”
× 11”K size
page (If A4
K is not available
then A3
L, B4L will be used.).
Make sure to check the paper
set in the paper tray.
set in the paper tray.
❒ The counter will not proceed
when the test pattern is printed.
FFFF
Place the test pattern on the expo-
sure glass and press [Start Scanning].
The image will be corrected after
“Please wait.” disappears.
sure glass and press [Start Scanning].
The image will be corrected after
“Please wait.” disappears.
UranosC1-ENcopyA_F1_FM.book Page 77 Friday, July 26, 2002 5:01 PM