Gestetner dsc332 Mode D’Emploi
Troubleshooting
106
5
The main power indicator
continues blinking and
does not turn off when
pressed.
continues blinking and
does not turn off when
pressed.
This occurs in the follow-
ing cases:
ing cases:
• The exposure glass cov-
er or the ADF is open.
• The machine is commu-
nicating with external
equipment.
equipment.
• The hard disk is active.
Close the exposure glass cover or
ADF, and check if the machine com-
municating with a computer.
ADF, and check if the machine com-
municating with a computer.
“
Self checking.
”,
“
Colour is being
adjusted.
” appears.
The machine is preforming
image adjustment opera-
tions.
image adjustment opera-
tions.
The machine may perform periodic
maintenance during operations. The
frequency and duration of mainte-
nance depends on the humidity,
temperature, and printing factors
such as number of prints, paper
size, and paper type. Wait for the
machine to get ready.
maintenance during operations. The
frequency and duration of mainte-
nance depends on the humidity,
temperature, and printing factors
such as number of prints, paper
size, and paper type. Wait for the
machine to get ready.
Original images are print-
ed on the reverse side of
the paper.
ed on the reverse side of
the paper.
You may have loaded the
paper incorrectly.
paper incorrectly.
Load paper correctly. Load paper
into Tray 1-4 with the print side up,
and into the LCT or bypass tray
with the print side down. See p.111
“Orientation-Fixed Paper or Two-
Sided Paper”.
into Tray 1-4 with the print side up,
and into the LCT or bypass tray
with the print side down. See p.111
“Orientation-Fixed Paper or Two-
Sided Paper”.
Misfeeds occur frequently.
The tray's side guides may
not be locked.
not be locked.
Check the side guides are locked.
See p.122 “Changing the Paper
Size”.
See p.122 “Changing the Paper
Size”.
The tray's end guide may
not be set properly.
not be set properly.
Check the end guide is set properly.
See p.122 “Changing the Paper
Size”.
See p.122 “Changing the Paper
Size”.
You may have loaded pa-
per of a size not shown on
the paper size selector.
per of a size not shown on
the paper size selector.
When using paper of a size that can-
not be detected automatically, use
Tray Paper Settings to set the paper
size. See p.53 “Tray Paper Size:Tray
2–4” and p.172 “Copy Paper”.
not be detected automatically, use
Tray Paper Settings to set the paper
size. See p.53 “Tray Paper Size:Tray
2–4” and p.172 “Copy Paper”.
An error message remains,
even if misfed paper is re-
moved.
even if misfed paper is re-
moved.
When a misfeed message
appears, it remains until
you open and close the cov-
er as required.
appears, it remains until
you open and close the cov-
er as required.
Clear misfed paper, and then open
and close the front cover. See p.114
“
and close the front cover. See p.114
“
x Clearing Misfeeds”.
Cannot print in duplex
mode.
mode.
You cannot use paper in
the bypass tray for duplex
printing.
the bypass tray for duplex
printing.
For duplex printing, select Tray 1-4
in copier mode or with the printer
driver.
in copier mode or with the printer
driver.
[1 Sided Copy]
is selected for
Paper Type: Tray 1-4.
Select [2 Sided Copy] for Paper Type:
Tray 1-4. See p.54 “Paper Type:
Tray 1–4”
Tray 1-4. See p.54 “Paper Type:
Tray 1–4”
You forgot your key opera-
tor code
tor code
—
Contact your service representative.
Problem
Causes
Solutions
0816JupiterC1GSG_GB_FM.book Page 106 Friday, August 29, 2003 7:56 PM