Gestetner dsc332 Mode D’Emploi

9

This section gives instructions for connecting the machine and computer, config-
uring the machine, and installing software.

❖

❖

❖

❖ When operating the machine with a parallel connection, USB connection, or IEEE

• Connect the machine and computer using a parallel cable, a USB cable, or

an IEEE 1394 (SCSI print) cable.

For more information, see p.10 “Connecting the Machine”.

• Install a printer driver from the CD-ROM.

For more information, see p.16 “Installing the Software”.

❒ "Network environment" describes a situation where the machine is con-

nected to a computer via Ethernet, wireless LAN, or IEEE 1394 (IP over
1394).

❖

❖

❖

❖ When operating the machine under a network environment

• Configure the network using the machine's control panel.

For more information, see "Network Configuration", Network Guide.

• Install a printer driver and other utilities from the CD-ROM.

For more information, see p.16 “Installing the Software”.

❒ The optional IEEE 802.11b interface unit, IEEE 1394 interface board, the

USB 2.0 interface board, and the Bluetooth interface unit cannot be in-
stalled in the machine at the same time.

JupiterC1-GB-Pref1-11_FM.book  Page 9  Thursday, September 4, 2003  2:02 PM