Gestetner dsc525 Mode D’Emploi
Turning On the Power
27
1
Turning On the Power
This section discusses how to turn on/off the power.
❖ Operation switch
This machine has two power switches: Operation switch and main power
switch.
• Operation switch (right side of the control panel)
switch.
• Operation switch (right side of the control panel)
Press to activate the machine. When the machine has finished warming up,
you can make copies.
you can make copies.
• Main power switch (left side of the machine)
Turning off this switch makes the main power indicator on the right side
of the control panel go off. When this is done, machine power is completely
off. When the fax unit (optional) is installed, fax files in memory may be
lost if you turn this switch off. Use this switch only when necessary.
of the control panel go off. When this is done, machine power is completely
off. When the fax unit (optional) is installed, fax files in memory may be
lost if you turn this switch off. Use this switch only when necessary.
Note
❒ This machine automatically enters Energy Saver mode or turns itself off if you
do not use it for a while. See “Timer Settings”, General Settings Guide.
Turning On the Main Power
Turn on the main power as follows:
A
Make sure the power code is firmly plugged into the wall outlet.
B
Open the main power switch cover and turn on the main power switch.
The main power indicator goes on.
The main power indicator goes on.
Note
❒ Do not turn off the main power switch immediately after turning it on. Do-
ing so may result in damage to the hard disk or memory, leading to mal-
functions.
functions.
❒ After you switch the main power on, a screen may appear to indicate that
the machine is initializing. Do not switch the power off during this process.
Initialization takes about three minutes.
Initialization takes about three minutes.
AMF018S
AthenaC1_Intro_F5-EN_FM_forPaper.book Page 27 Sunday, March 19, 2006 1:24 PM