Gestetner dsm516pf Mode D'Emploi
C
OPYING
4.11
4
6
Press Start to begin copying.
Your machine begins scanning the front side.
7
When “Set Backside” displays on the bottom line, open the
document cover and flip the document over. Close the
cover.
document cover and flip the document over. Close the
cover.
N
OTE
:
If you press the
Clear/Stop
button or if no buttons are
pressed for about 30 seconds, the machine cancels the copy job
and returns to Standby Mode.
and returns to Standby Mode.
8
Press Start again.
N
OTE
:
You cannot adjust the copy size using the
Reduce/
Enlarge
button for making a 2-side Copying.
2-up or 4-up Copying
The 2 or 4-up copying feature is available only when you load
documents in the ADF.
documents in the ADF.
1
Load the documents to be copied in the ADF.
2
Press Special.
3
Press Special or the scroll button (
or
) until “2-Up” or
“4-Up” displays on the bottom line.
4
Press Enter to save the selection.
5
If necessary, customise the copy settings including number
of copies, contrast, image by using the control panel
buttons. See “Setting Copy Options” on page 4.6.
of copies, contrast, image by using the control panel
buttons. See “Setting Copy Options” on page 4.6.
N
OTE
:
You cannot adjust the copy size using the
Reduce/
Enlarge
button for making a 2 or 4-up copy.
6
Press Start to begin copying.
N
OTE
:
2-up copy reduces your original document by 50 %. 4-up
copy reduces the document by the following rates depending on
the paper loaded: 76 % for Letter, 81 % for A4 and 95 % for
Legal.
the paper loaded: 76 % for Letter, 81 % for A4 and 95 % for
Legal.
1
2
1
2
3
4
2-up copying
4-up copying