Gestetner dsm616 Guide D’Information
Other Transmission Features
28
3
Manual Dial
The optional handset or an external telephone is required.
Pick up the handset of the optional
handset or the external telephone and
dial. When the line is connected and
you hear a high-pitched tone, press
the
handset or the external telephone and
dial. When the line is connected and
you hear a high-pitched tone, press
the
{{{{Start}}}} key to send your fax mes-
sage. If, on the other hand, you hear a
voice at the other end, continue con-
versation as normal.
voice at the other end, continue con-
versation as normal.
AAAA
Place the original, and then select
the scan settings you require.
the scan settings you require.
Reference
p.15 “Placing Originals”, Fac-
simile Reference <Basic Features>
p.29 “Scan Settings”, Facsimile
Reference <Basic Features>
simile Reference <Basic Features>
p.29 “Scan Settings”, Facsimile
Reference <Basic Features>
BBBB
Pick up the handset.
You will hear a tone.
You will hear a tone.
CCCC
Dial.
The machine immediately dials the
destination.
destination.
Note
❒ If you make a mistake, replace
the handset, and then try again
from step
from step
B
.
DDDD
When the line is connected and
you hear a high-pitched tone,
press the
you hear a high-pitched tone,
press the
{{{{Start}}}} key to send your
fax message.
The transmission starts.
The transmission starts.
Note
❒ If you hear a voice, tell the re-
ceiver that you want to send
them a fax message (ask them to
switch to facsimile mode).
them a fax message (ask them to
switch to facsimile mode).
EEEE
Replace the handset.
After transmission, the standby
display appears.
After transmission, the standby
display appears.
Note
❒ If you want to cancel a transmis-
sion, press the
{{{{Clear/Stop}}}} key,
and then remove the originals.
Kir-C2-ENcombine_F_FM.book Page 28 Wednesday, April 27, 2005 6:47 PM