Gestetner dsm616 Guide De Réglage Du Réseau

Remote Maintenance by telnet

83

-

-

-

-Address

❖

❖

❖

❖ Subnet Mask

A number used to numerically
“mask” or hide the IP address on
the network by eliminating those
parts of the address that are alike
for all machines on the network.

❖

❖

❖

❖ Broadcast address

A specified address for sending
data to specific devices on the net-
work.

❒ To get the above addresses, contact

your network administrator.

❒ If you do not know the address to

configure, use the machine's de-
fault.

❒ The Ethernet interface and IEEE

802.11b interface share the same
TCP/IP address. When changing
interfaces, the former interface set-
ting is applied to the new interface. 

❒ When installing the optional 1394

interface board, set the subnet so it
does not overlap with the Ethernet
interface or the IEEE 1394 inter-
face.

Use the “access” command to view
and configure access control. You can
also specify two or more access rang-
es.

❖

❖

❖

❖ Reference

❖

❖

❖

❖ Configuration

✩ range start-

•

✩ represents a target number
between 1 and 5. (Up to five ac-
cess ranges can be registered
and selected.)

Example: To specify accessible IP
addresses between 192.168.0.10
and 192.168.0.20:
msh> access 1 range 
192.168.0.10 192.168.0.20

❒ The access range restricts the

workstations from which print-
ing is possible by means of an
address. If you do not need to
restrict printing, make the set-
ting “0.0.0.0”.

❒ The entry is invalid if the start

address is greater than the end
address.

❒ Up to five access ranges can be

specified. The entry is invalid if
the target number is omitted.

❒ Sessions other than those from a

Web browser or telnet are limit-
ed by access control.

❖

❖

❖

❖ Access control initialization 

❒ This restores the factory default

so all access ranges become
“0.0.0.0”.