Gestetner dsm7110 Mode D’Emploi
11
1. Getting Started
This section describes how to start using this machine.
Guide to Components
This section introduces the names and functions of the components.
1.
Exposure glass
Place originals face down here.
2.
Auto Document Feeder (ADF)
Load a stack of originals here. They will
be fed automatically one by one.
be fed automatically one by one.
3.
Control panel
See “Control Panel”.
4.
On indicator
This indicator lights when you press the
operation switch.
operation switch.
5.
Operation switch
Press this switch to turn the power on
(the On indicator lights up). To turn the
power off, press this switch again (the On
indicator goes off).
(the On indicator lights up). To turn the
power off, press this switch again (the On
indicator goes off).
6.
Front cover
Open to access the inside of the machine.
7.
Paper tray (tray 1-3)
Load paper here.
8.
Main power switch
If the machine does not operate after
turning on the operation switch, check if
the main power switch is turned on.
turning on the operation switch, check if
the main power switch is turned on.
9.
Toner cover
Open to change the toner container.
10.
Suspend/Resume switch
Press to momentarily stop copying. Press-
ing again resumes the stopped operation.
ing again resumes the stopped operation.
APG066S