Gestetner dsm725e Guide De Réglage Du Réseau
Monitoring and Configuring the Printer
102
2
centrod is disabled.
Communication via parallel connection is un-
available because centrod is disabled in the se-
curity mode.
available because centrod is disabled in the se-
curity mode.
Enable centrod in the security mode.
Cannot create service connection
(In the remote printer mode) Connection to the
file server has not been established. The
number of file server users may have exceeded
the maximum capacity of the file server.
file server has not been established. The
number of file server users may have exceeded
the maximum capacity of the file server.
Cannot find rprinter (<print server
name>/<printer number>)
name>/<printer number>)
The printer with the number displayed on the
print server does not exist. Make sure that the
printer number is registered on the print server.
print server does not exist. Make sure that the
printer number is registered on the print server.
Change IP address from DHCP Server.
The IP address changes when DHCP lease is re-
newed. To always assign the same IP address,
set a static IP address to the DHCP server.
newed. To always assign the same IP address,
set a static IP address to the DHCP server.
child process exec error! (process name)
The network service failed to start. Turn the
printer off and then on. If this does not work,
contact your service or sales representative.
printer off and then on. If this does not work,
contact your service or sales representative.
Connected DHCP Server(<DHCP serverad-
dress>).
dress>).
The IP address was successfully received from
the DHCP server.
the DHCP server.
connection from <IP address>
Login was from the host IP address.
Could not attach to FileServer<error number> (In the remote printer mode) Connection to the
file server has not been established. The file
server has refused the connection. Check the
file server configuration.
server has refused the connection. Check the
file server configuration.
Could not attach to PServer<print server>
(In the remote printermode) Connection to the
print server has not been established. The
print server has refused the connection. Check
the print server configuration.
print server has not been established. The
print server has refused the connection. Check
the print server configuration.
Current Interface Speed:xxxMbps
Speed of the network (10Mbps, 100 Mbps, or
1Gbps).
1Gbps).
Current IP address <current IP address>
Current IPv4 address.
Current IPX address<IPX address>
Current IPX address
DHCP lease time expired.
DHCP lease time has expired. The printer tries
to discover the DHCP server again. The IP ad-
dress until now becomes invalid.
to discover the DHCP server again. The IP ad-
dress until now becomes invalid.
DHCP server not found.
The DHCP server was not found. Make sure
that the DHCP is on the network.
that the DHCP is on the network.
dhcpcd start.
The DHCPCD service (dhcp client service) has
started.
started.
dpsd is disabled.
Communication via PictBridge is unavailable
because PictBridge is disabled in the security
mode. Enable PictBridge in the security mode.
because PictBridge is disabled in the security
mode. Enable PictBridge in the security mode.
Duplicate IP=<IP address>(from<MAC ad-
dress>).
dress>).
The same IP address was used. Each IP ad-
dress must be unique. Check the address of the
device indicated in [MAC address].
dress must be unique. Check the address of the
device indicated in [MAC address].
Message
Problem and solutions