Gestetner dsm725e Mode D’Emploi
Control Panel
17
1
5.
{Check Modes} key
Press to check settings.
6.
{Program} key (copier/facsimi-
le/scanner mode)
Press to register frequently used settings,
or recall registered settings.
or recall registered settings.
7.
{Clear Modes} key
Press to clear previous copy job settings.
8.
{Energy Saver} key
Press to shift to and from Low Power
mode. See “Saving Energy”.
mode. See “Saving Energy”.
9.
{Interrupt} key (copier/scanner
mode)
Press to make interrupt copies during
copying or scanning. See “Interrupt
Copy”, Copy/Document Server Refer-
ence.
copying or scanning. See “Interrupt
Copy”, Copy/Document Server Refer-
ence.
10.
Main power indicator and On
indicator
The main power indicator goes on when
you turn on the main power switch.
The On indicator lights when the power
is on. Do not turn off the main power
switch while the power indicator is lit or
blinking. Doing so may damage the hard
disk.
you turn on the main power switch.
The On indicator lights when the power
is on. Do not turn off the main power
switch while the power indicator is lit or
blinking. Doing so may damage the hard
disk.
11.
Operation switch
Press this switch to turn the power on
(the On indicator lights up). To turn the
power off, press this switch again (the On
indicator goes off). See “Turning On the
Power”.
(the On indicator lights up). To turn the
power off, press this switch again (the On
indicator goes off). See “Turning On the
Power”.
12.
{Sample Copy} key
Press to make a single set of copies or
prints to check for print quality before
making multiple sets. See “Sample copy”,
Copy/Document Server Reference.
prints to check for print quality before
making multiple sets. See “Sample copy”,
Copy/Document Server Reference.
13.
{Start} key
Press to start copying, or to scan or print
documents stored on the Document Server.
documents stored on the Document Server.
14.
{Clear/Stop} key
• Clear
Press to delete a number entered.
• Stop
Press to stop a job in progress.
15.
{q} key (Enter key)
Press to enter a numerical value.
16.
Number keys
Use to enter the desired number of cop-
ies, fax numbers, or data for a selected
function.
ies, fax numbers, or data for a selected
function.
17.
{Tone} key (facsimile mode)
Press to send tonal signals down a pulse
dialing line. See “Entering a tone”, Fac-
simile Reference.
dialing line. See “Entering a tone”, Fac-
simile Reference.
18.
{Pause/Redial} key (facsimile
mode)
• Pause
Inserts a pause when you are dialing
or storing a fax number. A pause can-
not be inserted as the first digit. See “En-
tering a pause”, Facsimile Reference.
or storing a fax number. A pause can-
not be inserted as the first digit. See “En-
tering a pause”, Facsimile Reference.
• Redial
Press to redial one of the last ten numbers.
See “Redial”, Facsimile Reference.
See “Redial”, Facsimile Reference.
19.
{On Hook Dial} key (facsimile
mode)
Press to dial while listening to the speak-
er tone. See “On Hook Dial”, Facsimile
Reference.
er tone. See “On Hook Dial”, Facsimile
Reference.
20.
{Start Manual RX} key (facsimile
mode)
Press when Manual Reception is set. See
“Manual Reception”, Facsimile Reference.
“Manual Reception”, Facsimile Reference.
21.
Function keys
Press to display the operation screen of
one of the following functions:
one of the following functions:
• Copy
• Document Server
• Facsimile
• Printer
• Scanner
The indicator of the selected function
goes on. See “Changing Modes”.
• Document Server
• Facsimile
• Printer
• Scanner
The indicator of the selected function
goes on. See “Changing Modes”.
22.
Function status indicators
These show the status of the above functions:
• Yellow: selected.
• Green: active.
• Red: interrupted.
• Green: active.
• Red: interrupted.