Gestetner dsm725e Mode D’Emploi

R CAUTION:

• Protect the machine from dampness or wet weather, such as rain and snow.

• Unplug the power cord from the wall outlet before you move the machine.

While moving the machine, you should take care that the power cord will not
be damaged under the machine.

• When you disconnect the power plug from the wall outlet, always pull the

plug (not the cable).

• To disconnect the power cord, pull it out by plug. Do not drag the cord itself.

Doing so may result in damage to the cord, leading to fire or electric shock.

• Do not allow paper clips, staples, or other small metallic objects to fall inside

the machine.

• Keep toner (used or unused) and toner containers out of reach of children.

• For environmental reasons, do not dispose of the machine or expended

supply waste at household waste collection points. Disposal can take place
at an authorized dealer.

• The inside of the machine could be very hot. Do not touch the parts with a

label indicating the “hot surface”. Otherwise, an injury might occur.

• If toner or used toner is inhaled, gargle with plenty of water and move into a

fresh air environment. Consult a doctor if necessary.

• If toner or used toner gets into your eyes, flush immediately with large

amounts of water. Consult a doctor if necessary.

• If toner or used toner is swallowed, dilute by drinking a large amount of wa-

ter. Consult a doctor if necessary.

• Avoid getting toner on your clothes or skin when removing a paper jam or

replacing toner. If your skin comes into contact with toner, wash the affected
area thoroughly with soap and water.

• If toner gets on your clothing, wash with cold water. Hot water will set the

toner into the fabric and may make removing the stain impossible.

• Keep the machine away from humidity and dust. Otherwise a fire or an elec-

tric shock might occur.

• Do not place the machine on an unstable or tilted surface. If it topples over,

an injury might occur.

• Make sure the room where you are using the machine is well ventilated and

spacious. Good ventilation is especially important when the machine is used
heavily.

• The fusing section of this machine might be very hot. Caution should be tak-

en when removing misfed paper.

• Do not use aluminum foil, carbon paper, or similar conductive paper to avoid

a fire or machine failure.