Gestetner f540 Mode D’Emploi

Reception Features

72

 p.20 “Transfer Request” 

This reports whether transmission to
the End Receivers was successful or not.
When the Transfer Station has trans-
ferred the message to all End Receiv-
ers, it sends the Transfer Result
Report back to the Requesting Party.
The machine prints the report if it
cannot be sent back to the Requesting
Party.

You must program the fax number
of the Requesting Party in a Quick
Dial key or Speed Dial in the
Transfer Station. Also, the return
address of the machine needs to be
programmed beforehand. See
p.152 “Transfer Report”.

❒ You can set whether to print the

document image is printed on this
report with the User Parameters.
See p.138 “User Parameters”
(switch 04, bit 7).

-

-

-

-Sending the Transfer Result 

This machine compares the fax num-
ber of the Requesting Party with the
Requesting Party's number pro-
grammed in a Quick Dial key or
Speed Dial, and if the last five digits
of the two numbers match, it sends
the Transfer Result report to the Re-
questing Party.
• Requesting Party's own number:

• Transfer Station's Quick Dial:

This feature allows same make or oth-
er make fax machines without the
Transfer Request function to perform
transfer requests to this machine.

In order for this machine to per-
form this function, you need to
register the Remote ID, and the
Transfer Result Report return ad-
dress in Quick Dial keys or Speed
Dials. See p.148 “ID Codes”; p.63
“Quick Dial”,  Basic Features; and
p.71 “Speed Dial”,  Basic Features.

❒ The Requesting Party's fax ma-

chine must be able to send out a
push signal.

❒ The Remote Transfer function only

works with the standard and op-
tional G3 line. NIC FAX unit (Op-
tion for Type1) is not supported.

❒ You can select whether the ma-

chine accepts Remote Transfers or
not with the User Parameters. See
p.138 “User Parameters” (switch
11, bit 0).

This procedure describes how to
make a Transfer Request to this ma-
chine from the Requesting Party's
machine. Require the Requesting Par-
ty to perform the following proce-
dure.

❒ To cancel the operation in progress,

press the 

{{{{q

q

q

q}}}} key twice.

AAAA

StellaF25_EN_Combine_F_pre_FM.book  Page 72  Thursday, August 26, 2004  8:45 PM