Gestetner f530 Manuel De Montage
10
14.
Enter your office, company, or personal
name or any other appropriate identifica-
tion.
tion.
Own Name:[ABC] /OK
XYZ COMPANY
❚❚❚❚❚❚❚❚❚
Note
• The [Shift] key does not work when entering “Own
Name”. Only uppercase is available for “Own
Name”.
Name”.
15.
Press the OK key.
“Programmed” will flash on the display.
The Own Name programmed in step 14 appears.
After Own Name, enter your fax number so the
Own Name and fax number are printed in the
Fax Header when you fax documents.
The Own Name programmed in step 14 appears.
After Own Name, enter your fax number so the
Own Name and fax number are printed in the
Fax Header when you fax documents.
Header:[ABC] /OK
XYZ COMPANY
❚❚❚❚❚❚❚❚❚
Important
In the USA, this must contain the telephone
number of the line your machine is connected
to. It will be printed on the header of every page
you send. Required in the USA.
number of the line your machine is connected
to. It will be printed on the header of every page
you send. Required in the USA.
16.
Press the OK key to keep the Fax Header
as it is.
“Programmed” will flash on the display.
“Programmed” will flash on the display.
Fax Number:
❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚
17.
Enter your Fax Number including the
country and area code (but no pauses).
Fax Number: /OK
+111234567890
❚❚❚❚❚❚
Note
• Enter “+” with the Symbols key.
• The fax number you set here will not be printed in
• The fax number you set here will not be printed in
the Fax Header. It will appear in reports,and on the
receivers’ display, etc.
receivers’ display, etc.
After Initial Settings
• You can check and adjust these settings using function
keys.
TDate & Time : See Chapter 6, "Setting the Data
and Time" in the Advanced Features manual.
TLine Type : See Chapter 7, "Line Type" in the
Advanced Features manual.
TOwn Name, Fax Header, Fax Number : See Chap-
ter 3, "Own Name/Fax Header/Own Fax
Number" in the Basic Features manual.
Number" in the Basic Features manual.
Reference
See Chapter 10, “Installation” in the Advanced Features
manual for further information regarding installation.
manual for further information regarding installation.
Please keep this manual and any leftover
parts in a safe place.
parts in a safe place.
5.
Enter the date with the number keys.
Day: Press OK
[ 1]
6.
Press the OK key.
7.
Press
the
or
key to select AM or PM.
AM/PM:
WV/OK
[AM] PM
8.
Press the OK key.
9.
Enter the current hour setting (1 to 12) with
the number keys.
the number keys.
Time: Press OK
[12:00]
10.
Enter the current minute setting (00 to 59)
with the number keys.
Time: Press OK
[12:30]
11.
Press the OK key.
12.
Press the
or
key to set your
machine for a tone dial line or a pulse dial
line.
line.
Line Type:
WV/OK
Pulse [Tone]
13.
Press the OK key.
“Programmed” will flash on the display.
The following display appears.
The following display appears.
Own Name:[ABC]
[
❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚]
18.
Press the OK key.
“Intial Setup Completed” will flash on the
display.
The following display appears.
display.
The following display appears.
Ready 100% 12:30AM
Set Orig./Enter NO.