Gestetner 27ao Mode D'Emploi
JOB EDITOR
RW-470 CLIENTS 33
“Default Specific“ tab
On the “Default specific“ tab you enter the basic setting for all
new entries of a job.
new entries of a job.
Note: All basic settings apply for newly added entries
except for the number of copies.
• Formats
In this section of the tab you select the drawing format, in which
the drawing is to be printed. Apart from the “Original“, “Win-
dow“ and “Percent“ options, you will also find the drawing for-
mats, which are the usual standards in Germany, all Europe and
in the USA: ISO A/B/C, ANSI A-E and ARC A-E.
the drawing is to be printed. Apart from the “Original“, “Win-
dow“ and “Percent“ options, you will also find the drawing for-
mats, which are the usual standards in Germany, all Europe and
in the USA: ISO A/B/C, ANSI A-E and ARC A-E.
In the format setting “Original“ the program obtains the format
size from the original file of the drawing. This is the presetting.
size from the original file of the drawing. This is the presetting.
If you use the format setting “Window“, you can freely set the
values for the format width and format height, whereby the style
sheet is set by the window value. The freely settable settings refer
both to the alignment as well as the format size and the format
margin:
values for the format width and format height, whereby the style
sheet is set by the window value. The freely settable settings refer
both to the alignment as well as the format size and the format
margin: