Gestetner 27ao Mode D'Emploi
PEN SETTINGS
RW-470 CLIENTS 55
Calcomp - Pens
The pen attributes are set on the “pen“ tab:
• Pen size
The pen sizes are entered directly using the keyboard in the first
column under “Size“. The maximum values that can be entered
depend on the size unit, which you set in the configuration pro-
gram. The current valid size unit is shown in the status bar at the
bottom of the screen.
If you want to “Remove” a pen, you can set the pen widths as
“0“ or as the pen color “White“.
The standard values for the pen widths of the 16 Calcomp pens
are given in the technical manual (Chapter “Calcomp com-
mands and pens“).
column under “Size“. The maximum values that can be entered
depend on the size unit, which you set in the configuration pro-
gram. The current valid size unit is shown in the status bar at the
bottom of the screen.
If you want to “Remove” a pen, you can set the pen widths as
“0“ or as the pen color “White“.
The standard values for the pen widths of the 16 Calcomp pens
are given in the technical manual (Chapter “Calcomp com-
mands and pens“).
• Pen color
Select the pen color from the second column under “Color“.
Open the pull down menu and select the required color. If you
want to “remove“ a pen, you can set the pen color as “White“ or
the pen widths as “0“. You can set the gray shade that a color
represents on the “Colors“ tab.
Open the pull down menu and select the required color. If you
want to “remove“ a pen, you can set the pen color as “White“ or
the pen widths as “0“. You can set the gray shade that a color
represents on the “Colors“ tab.
• Grey (%)
The gray scale value can only be adjusted if you have selected
“Gray“ as the color. Here too the changes are made directly us-
ing the keyboard.
“Gray“ as the color. Here too the changes are made directly us-
ing the keyboard.