Gestetner 27ao Mode D'Emploi
PEN SETTINGS
RW-470 CLIENTS 59
• Pattern Style
Three types of patterns are defined for Calcomp drawings, in
which the “Pattern“ command is used.
“Round“ means that a certain colored area is filled with a certain
number of filled circles, which are given a certain arrangement
on the area, to achieve an intended color saturation.
In “Random“ on the other hand a percentage of color saturation
is determined for the same colored area, which is then converted
into the necessary number of pixels, which are randomly ar-
ranged over the area to achieve the intended color saturation.
Which is why that when circle patterns are overlapped, the cov-
ered areas cannot be as clearly identified as if two random pat-
terns are overlapped. The recommended default setting is
therefore “Random“, because you can achieve the best results.
As the “Round“ setting has been installed as a standard to date,
this option has been retained of you do not see the need to print
the same drawings differently in future.
Finally, you can also select the gray value pattern “Symmetric
pattern“. As the name suggests, the “Symmetric pattern“ pro-
duces a symmetrical gray value pattern. Try and see which pat-
tern produces the best printing results for your graphic. To do
this you must reload the drawing in preview file after each
change.
which the “Pattern“ command is used.
“Round“ means that a certain colored area is filled with a certain
number of filled circles, which are given a certain arrangement
on the area, to achieve an intended color saturation.
In “Random“ on the other hand a percentage of color saturation
is determined for the same colored area, which is then converted
into the necessary number of pixels, which are randomly ar-
ranged over the area to achieve the intended color saturation.
Which is why that when circle patterns are overlapped, the cov-
ered areas cannot be as clearly identified as if two random pat-
terns are overlapped. The recommended default setting is
therefore “Random“, because you can achieve the best results.
As the “Round“ setting has been installed as a standard to date,
this option has been retained of you do not see the need to print
the same drawings differently in future.
Finally, you can also select the gray value pattern “Symmetric
pattern“. As the name suggests, the “Symmetric pattern“ pro-
duces a symmetrical gray value pattern. Try and see which pat-
tern produces the best printing results for your graphic. To do
this you must reload the drawing in preview file after each
change.
• Synchronization
Synchronization is used to check the completeness of the Cal-
comp files, which have been sent from the application program.
Four pieces of information are used for the synchronization set-
tings:
comp files, which have been sent from the application program.
Four pieces of information are used for the synchronization set-
tings:
• Sync character
• End character
• Double Sync
• Test sum
You can either let RW-470 PLOTCLIENT WIN determine the val-
ues or you can enter the necessary settings yourself. If the pro-
gram is to determine the values, activate “Auto detection“.
You can either let RW-470 PLOTCLIENT WIN determine the val-
ues or you can enter the necessary settings yourself. If the pro-
gram is to determine the values, activate “Auto detection“.
We recommend that you do not alter the standard values if you
want to enter the settings yourself. Should you nevertheless want
want to enter the settings yourself. Should you nevertheless want