Leica V-Lux 20 Mode D'Emploi
148
149
Q&A
Troubleshooting
(Continued)
Playback (continued)
Blacken red areas of recorded pictures.
●
When digital red-eye correction (
,
,
) is operating, if a subject is recorded that has
skin-colored areas with red areas inside, the digital red-eye correction function may blacken the red
areas.
→ We recommend setting the flash to
,
or
, or [RED-EYE REMOVAL] to [OFF] before
recording.
Sounds of camera operations will be recorded in motion pictures.
●
Camera operation sounds may be recorded as camera automatically adjusts lens aperture during
motion picture recording; this is not a fault.
Motion pictures still and pictures with audio taken by this camera cannot be played in
other cameras.
●
Motion pictures and pictures with audio taken with this camera may not always be able to be played
back with cameras by other manufacturers. Playback may also not be possible with other Leica
compact digital cameras.
●
In some cases, motion pictures and pictures with audio taken by this camera cannot be played back
by digital cameras from other companies.
TV, computer, printer
No image appears on TV. Image blurred or not colored.
●
Not connected correctly (→136, 137).
●
The television has not been switched to auxiliary input.
●
The television does not support the type of card used.
●
Check the [VIDEO OUT] setting (NTSC/PAL) on the camera. (→24)
TV screen display different to LCD monitor.
●
Aspect ratio may be incorrect or edges may be cut off with certain televisions.
Cannot play motion pictures on TV.
●
Card is inserted into TV.
→ Connect with AV cable (supplied) or HDMI mini cable (→8) and play on camera (→136, 137).
Picture is not displayed on full TV screen.
●
Check [TV ASPECT] settings (→24).
HDTV Link (HDMI) is not working.
●
Is the HDMI mini cable (→8) connected correctly? (→137)
→ Check that it is fully inserted.
●
Is the camera’s [HDTV Link] setting set to [ON]? (→25)
→ The input setting may not be able to be changed automatically with certain television HDMI
sockets. In this case, please change the input setting with your television’s remote control
(consult your television’s operating instructions for details).
→ Check the HDTV Link (HDMI) settings on the device you are connecting to.
→ Turn the camera’s power off and on again.
→ Turn the (compatible) TV's remote control (HDMI device control) setting to `off', and then to `on'
again. (Consult your TV's instructions for details.)
Cannot send pictures to computer.
●
Not connected correctly (→129).
●
Check whether computer has recognized camera.
●
Set [USB MODE] to [PC] (→24).
TV, computer, printer (continued)
Computer does not recognize card (only reads built-in memory).
●
Disconnect USB connection cable and reconnect with card in place.
●
Set mode dial to any except
.
Computer does not recognize card. (When using an SDXC memory card)
→ Check whether your computer is compatible with SDXC memory cards.
→ A message prompting you to format the card may appear when you connect it. Do not format the
card.
→ If the [ACCESS] indicator on the LCD monitor does not go off, turn off the camera’s power before
disconnecting the USB connection cable.
Cannot print when connecting to printer.
●
Printer not compatible with PictBridge.
●
Set [USB MODE] to [PictBridge (PTP)] (→24).
Cannot get the date printing.
●
Make date printing settings before printing.
→ In shop: Make [PRINT SET] settings (→124), and request printing ‘with dates’.
→ With printer: Make [PRINT SET] settings, and use a printer compatible with date printing.
●
Use [TEXT STAMP] before printing (→118).
Edges cut off pictures when printing.
●
Release any trimming or edgeless printing settings on printer before printing.
(Consult printer operating manual.)
●
The pictures were recorded in
aspect ratio.
→ If printing in shop, check if 16:9 sizes can be printed.