Preh mc 15 Mode D'Emploi
‧
V-POSITION
Pressing
moves the display image to the upward; Pressing
moves the display
image to the downward.
‧
OSD H-POSITION
Pressing
moves the OSD image to the right; pressing
moves the OSD image to
the left.
‧
OSD V-POSITION
Pressing
moves the OSD image to the upward; pressing
moves the OSD image to
the downward.
‧
Overlapped Mode
Pressing the
button to Overlapped Mode.
The "UserPrefOverlappedMode" variable is used to control the overlapped mode and the
bits are set based
on the current mode to the other mode. If the current input width is 640, then it sets the
"UserPrefOverlappedMode" to DOS; and if the width is 720, then it sets the variable to
Graphics to change the input width.
However this variable is cleared after the mode setup for the next new mode. Therefore
this variable does not need to be saved in the NVRAM.
‧
VOLUME
Adjust the value using
and
buttons.
10 3.2005