ONKYO HT-S8400 Manuel D’Utilisation

En

■

If either of the following messages is not displayed on the 
AV receiver’s display, check the connection to your 
iPod/iPhone.
• PORT Reading

The AV receiver is checking the connection with the 
dock.

The AV receiver do not support the connected dock.

UP-A1 Dock is connected.

• The AV receiver displays the message “UP-A1” for several 

seconds after recognizing the UP-A1.

With the RI Dock, you can easily play the music stored on 
your Apple iPod/iPhone through the AV receiver and 
enjoy great sound, and watch iPod/iPhone slideshows and 
videos on your TV. In addition, the onscreen display 
(OSD) allows you to view, navigate, and select your 
iPod/iPhone model’s contents on your TV, and with the 
supplied remote controller, you can control your 
iPod/iPhone from the comfort of your sofa. You can even 
use the AV receiver’s remote controller to operate your 
iPod/iPhone.

• Enter the appropriate remote control code before using the AV 

receiver’s remote controller for the first time (

• Connect the RI Dock to the AV receiver with an 

u cable 

• Set the RI Dock’s RI MODE switch to “HDD” or 

“HDD/DOCK”.

• Set the AV receiver’s Input Display to “DOCK” (

page 37).

■

System On
When you turn on the AV receiver, the RI Dock and 
iPod/iPhone turn on automatically. In addition, when RI 
Dock and iPod/iPhone are on, the AV receiver can be 
turned on by pressing 

8SOURCE.

If you press the remote controller’s 

1 (Playback) 

while the AV receiver is on standby, the AV receiver 
will automatically turn on, select your iPod/iPhone as 
the input source, and your iPod/iPhone will start 
playback.

Direct Change
If you start iPod/iPhone playback while listening to 
another input source, the AV receiver will automatically 
switch to the input to which the RI Dock is connected.

Other Remote Controllers
You can use the remote controller that came with the 
AV receiver to control other iPod/iPhone functions. The 
available functionality depends on the AV receiver.

iPod/iPhone Alarm
If you use the Alarm function on your iPod/iPhone to 
start playback, the AV receiver will turn on at the 
specified time and select your iPod/iPhone as the input 
source automatically.

• Linked operations do not work with video playback or when the 

alarm is set to play a sound.

• If you use your iPod/iPhone with any other accessories, 

iPod/iPhone playback detection may not work.

• This function works only in Standard mode (

• The System On function may not work depending on the RI 

Dock.

• On the iPod with video and iPod nano (1st generation), the click 

wheel is disabled during playback.

By pressing the REMOTE MODE that’s been 
programmed with the remote control code for your Dock, 
you can control your iPod/iPhone in the Dock with the 
buttons described further in this section.
See “Entering Remote Control Codes” for details on 
entering a remote control code (

page 61).

See the Dock’s instruction manual for more information.

PORT is preprogrammed with the remote control code for 
controlling a Dock via Universal Port.
You can control your iPod/iPhone when “PORT” is 
selected as the input source.

• Set the RI Dock’s RI MODE switch to “HDD” or 

“HDD/DOCK”.

•

8SOURCE may not work with a remote control code 
(without 

u). In this case, make an u connection and 

enter the remote control code 81993 (with 

u).

■

Make an 

u connection and enter the remote

control code 81993 (with 

u).

• Set the AV receiver’s Input Display to “DOCK” 

(

■

You must enter the remote control code 82990 first 
(

page 62).

■

• Use the AV receiver’s volume control to adjust the playback 

volume.

• While your iPod/iPhone is inserted in the RI Dock, its volume 

control has no effect.

• If you do adjust the volume control on your iPod/iPhone while 

it’s inserted in the RI Dock, be careful that it’s not set too loud 
before you reconnect your headphones.