ONKYO dv-m301 Manuel D'Instructions

This changer features two digital (optical and coaxial) and
also analog audio output connection possibilities.

You can enjoy the digital audio recorded on DVD discs
from both optical digital and coaxial digital output jacks.

When a DVD recorded in Dolby Digital, DTS, or MPEG is
playing, noise will be output if you have made
connections via the digital audio jacks to an AV
component that cannot decode a Dolby Digital, DTS, or
MPEG digital bitstream. In this case, be sure to set up
the Setup Navigator audio settings to best reflect the
type of system you are using (page 21). Additionally, the
digital audio settings can be adjusted manually in the
Setup screen Audio 1 menu (page 41).

The digital signal is transmitted as light pulses through a
fiber-optic cable.

• Use a commercially available fiber-optic cable to

connect the DIGITAL (OPTICAL) OUT on the changer
to the digital optical input on an AV component.

The digital signal is transmitted electronically through a
coaxial cable.

• Use a commercially available coaxial cable to connect

the coaxial digital output on the changer to the coaxial
digital input on an AV component.

• Analog audio connections can be made to a stereo

amplifier or receiver, or also can be made to a TV or
monitor with stereo input jacks.

• Use the supplied audio cable to connect the AUDIO

OUT jacks on the changer to the audio input jacks on a
stereo amplifier or receiver.

• When making analog audio connections, be sure to

match the color of the plugs with the color of the
jacks (red and white).