ONKYO TX-DS989 Manuel D'Instructions

49

Be aware that if you start using the system in the remote zone
(Zone 2) while a recording is going on in the main zone, the
recording is aborted.

After pressing the Zone 2 button, you must press an input
source button within 8 seconds. To select the same source as
that selected for the main zone, press the Zone 2 button twice
in succession. The indicator above the selected input source
will light green. Adjust the volume in the remote zone as
desired.

• If the Zone 2 button was pressed twice so that the same source

is being played in the main and remote zones, then changing
the input source in the main zone also changes the input source
for the remote zone.

• In the remote zone, you can only play the source in the 2-

channel mode. You cannot play the source in the remote zone
in the surround mode.

• If the Rec Out button is pressed in the main room while

someone is using the system in the remote zone, the Zone 2
function will be deactivated and the source will turn off in the
remote zone.

• The Zone 2 terminal is an analog output. Digital signals are not

output. If no sound is heard from the selected input source,
check if the component is connected to the analog inputs.

• Please note that some third-party multi-room system

components may not be fully compatible with the Onkyo
multi-room system components.