ONKYO TX-NR3009 Mode D'Emploi

En

■

`

Stereo Source 1, Stereo Source 2, Stereo Source 3, 
Multich Source 1, Multich Source 2, Multich 
Source 3

When playing back different content types on the same 
source, or when listening to a single content type on 
different sources, you can pre-register the settings that 
best suit each content in “Sound Program”. The 
registered settings can then be called up and modified in 
one set. Use “Sound Program Edit” to register and 
modify a combination of settings.

• To select the registered settings, see “Sound Program” 

(

■

You can assign a default listening mode that will be 
selected automatically when you select the sound 
program.
The “Last Valid” option means that the listening mode 
selected last will be used.
The “Straight Decode” option means that straight 
decoding listening mode (Dolby Digital, DTS, etc.) is 
selected.

■

`

No, Yes

You can choose whether or not to use the subwoofer with 
the sound program.

■

*1

`

Off, On

See “Music Optimizer” (

).

■

*1

`

`

Manual:

The manual setting in “Equalizer Settings” 
(

) is applied.

■

*1

`

Off, Movie, Music

■

*1*2

`

Off, On

See “Dynamic EQ” (

■

*1*2

`

Off, Light, Medium, Heavy

See “Dynamic Volume” (

■

*1

`

Off, On

See “Dolby Volume” (

).

• “Listening Mode” is only available when the input signal 

matches the setting of “Sound Program”.

• You cannot select the “Subwoofer” setting if you set to “No” in 

the “Speaker Configuration”.

• “Music Optimizer” is only available when “Stereo Source 1”, 

“Stereo Source 2” or “Stereo Source 3” is selected.

• When  “Audyssey Quick Start” has been used for measurement, 

the “Audyssey”setting cannot be selected.

*1

This setting cannot be used when the “Listening Mode” 
setting is set to “Pure Audio” or “Direct”.

*2

To enable this setting, you must first perform the Room 
Correction and Speaker Setup.

Items can be set individually for each input selector.

■

`

`

Movie:

Select this setting for movie material.
The Audyssey indicator lights.

`

Music:

Select this setting for music material.
The Audyssey indicator lights.

• If  the  “Audyssey” setting is set to “Off”, the “Equalizer” 

settings are applied (

).

• When  “Audyssey Quick Start” has been used for measurement, 

the “Audyssey”setting cannot be selected.

• Audyssey equalizing does not work with DSD sources.

Preparation
Press the input selector buttons to select an input source.

The tone for each speaker is set automatically by 
Audyssey MultEQ

®

XT32 Room Correction and 

Speaker Setup. To enable the following settings, you 
must first perform the Room Correction and Speaker 
Setup (

).

These technologies cannot be used when:
• a pair of headphones is connected, or
• Speakers B is being used, or
• either Pure Audio or Direct listening mode is selected.