ONKYO TX-NR801 Manuel D'Instructions

66

The TX-NR801/TX-NR801E allows you to watch and 
listen to two separate input sources at the same time. 
This allows you to, for example, place speakers and a 
television in two different rooms so that two or more 
people can enjoy two different movies at the same time. 
The room where the TX-NR801/TX-NR801E is actually 
located is referred to as the main room while the separate 
room is referred to as the remote zone (Zone 2). In addi-
tion, the IR IN/OUT terminal of the TX-NR801/
TX-NR801E allows you to control the TX-NR801/
TX-NR801E from the remote zone (Zone 2) with the 
remote controller even though the remote zone is physi-
cally separated.

Note:
ZONE 2 is analog only. Digital signals are not output. 
If no sound is heard from the selected input source, 
check if the component is connected to the analog 
inputs.

When you use the 5.1 channel speaker system for the 
main room, the unused terminals for the surround back 
speaker or the surround back pre out can be used for the 
remote zone (Zone 2). Use the SURR BACK/ZONE 2 
SPEAKERS terminals when you want to connect the 
speakers for the remote zone (Zone 2) directly to the 
TX-NR801/TX-NR801E. Use the SURR BACK/ZONE 
2 PREOUT terminals when you want to connect the 
power amplifier or pre-main amplifier for dynamic 
sound.

Be sure to turn off the power before making connections.

Be sure to turn off the power before making connections.

Be sure to turn off the power before making connections.