Tascam DR-07MKII Mode D'Emploi
TASCAM DR-07MKII
51
NOTE
Higher values provide better recording quality.
•
WAV files are higher quality than MP3 files, but they take up
•
more space, so MP3 formats allow for longer recordings.
4 Press the  button to show settings.
5 Use the + or – button to select
5 Use the + or – button to select
TYPE
, and
press the ¯ or Á button.
The procedure to select the creation of a
stereo or mono file is as follows.
Use the + or – button to select
Use the + or – button to select
STEREO
(default) or
MONO
.
If
MONO
is selected, a mono file is created, and
the same signals are sent to both L and R level
meters and output channels.
If sound is recorded in
MONO
in WAV format,
the file size will be half that recorded in
STEREO
, allowing long time recording.
6 Press the  button to show settings.
7 Use the + or – button to select
7 Use the + or – button to select
SAMPLE
, and
press the ¯ or Á button.
Set the sampling frequency with the + or −
button to one of the following options.
44.1k
(default),
48k
,
96k
NOTE
96k
cannot be selected if FORMAT is set to MP3.
8 Press the  button to show settings.
9 Use the + or – button to select
9 Use the + or – button to select
SIZE
, and
press the ¯ or Á button.
4–Recording