Key Digital kd-cda12p Mode D'Emploi
KD-CDA12P Operating Instructions
Page
KD-CDA12P Operating Instructions
Page
How to Contact Key Digital
™
Repairs and Warranty Service
Should your KD-CDA12P require warranty service, please contact Key Digital
™
to obtain a
Returned Materials Authorization (RMA) number
Please contact us at either:
Please contact us at either:
Phone:
1-914-667-9700 ext 215
E-mail:
rma@keydigital.com
Technical Support
For technical questions about using our products, please contact us at either:
Phone:
1-914-667-9700 ext 301
E-mail:
tech@keydigital.com
Customer Support
For customer support questions about using our products, please contact us at either:
Phone:
1-914-667-9700 ext 223
E-mail:
customersupport@keydigital.com
Warranty
All Key Digital
™
products are built to high manufacturing standards and should provide years of
trouble-free operation. They are backed by a limited two-year parts and labor warranty.
›
›
➔
➔
›
➔
➔
›
➔
➔
Technical Specifications
Model #: KD-CDA12P — 12 Channel Component/RGBHV Video/Audio Distribution Amplifier
Each input and output is comprised of five RCA connectors consisting of independent HDTV/SDTV
Each input and output is comprised of five RCA connectors consisting of independent HDTV/SDTV
Component Video (YPrPb) plus two channels of audio L&R or PCM digital audio.
Video:
Standard YPrPb 1 volt p-p 75 Ohm terminated Component Video.
Video bandwidth:
- 3 dB @ 300 MHz.
Audio:
Standard “line” type high impedance two-channel, Left & Right. Each L or R can be used for
PCM digital audio.
Cable Recommendation
Each run of YPrPb cable MUST be the same length (300’ max.).
KD-CDA12P Characteristics:
Size: 12-3/16” x 5-1/8” x 1-13/16” [310 x 130 x 46 mm] (case).
12-7/16” x 5-5/8” x 1-15/16” [316 x 143 x 49 mm] (with protruding jack/hardware).
Weight: 3.5 lbs. (1.6 Kg.)
Power: 6V / 5A, 110-120 VAC, 60Hz.
Weight: 3.5 lbs. (1.6 Kg.)
Power: 6V / 5A, 110-120 VAC, 60Hz.
No other power adapter can be used with this unit!
Orientation/Mounting Information:
The top and bottom of the unit are solid metal (no vents).
The unit may be oriented horizontally, or mounted vertically on a wall. Use 2 #8 or M4 screws to
The unit may be oriented horizontally, or mounted vertically on a wall. Use 2 #8 or M4 screws to
hang the unit (keyhole slots are provided on the base of the unit). If installing into sheet-rock or
hollow walls, provide proper screw support with bolts or sheet-rock anchors.
Limited Warranty: 2 years parts and labor.
Limited Warranty: 2 years parts and labor.
›
›
›
›
›
›
›
➔
›
›
›
KD-CDA12P_Manual.indd 8-9
9/29/06 11:16:44 AM