Elmo dvr v5.01 Manuel D’Utilisation

To setup the Configuration Setup, do the following:

1. Check the Display Sensor Status Bar checkbox to display the Sensor panel on the main screen when

connected to the Remote site.

2. Check the Display Control Status Bar checkbox to display the Control panel on the main screen when

connected to the Remote site.

3. Check the Display WATERMARK logo checkbox to display the watermark logo in green font on all wa-

termarked video recordings during the playback.

4. Check the Start with Password checkbox to request password on each startup

5. Configure the Automatic Backup in the Received Data Save Setup menu:

a. Check the Current Screen Data Save checkbox to save the live video recordings on the selected local

drive, as they are viewed in the ELMO DVR Remote software.

b. Check the Current Screen Data Save checkbox to save the live video recordings on the selected local

drive, as they are viewed in the ELMO DVR Remote software.

c. Choose the local drive in the Select Save Drive drop-down menu. The data from the Automatic Backup

will be saved to this local drive.

6. In the Display Mode menu choose between DirectX and RGB display modes. If the video card meets the

minimum hardware requirement of 64MB, select DirectX. If the video card does not meet the minimum hardware
requirement, select RGB.

Note

ELMO USA CORP. does not guarantee
proper functioning of ELMO Remote if the
system does not meet minimum hardware
requirements.

7. Select the server sort order from Ascending, Descending, or None in the Sort Server Info by Alphabetic

Order menu

8. Check the Play Sound with unknown server checkbox to use the custom alarm with all servers that

do not have a custom alarm assigned to them

Choose the *.wav file for the custom alarm in the Emergency Alarm field. Click Browse button

locate the *.wav file that will play every time alarm is triggered on the remote site.

131

ELMO DVR User Manual v5.01

Configuration Setup

ELMO DVR Remote