Elmo PTC-401CIP Manuel D'Instructions

■ Do not use any AC adapter other than the one supplied with the product. 
■ This Camera has no power switch. Before maintenance, disconnect the

power plug from the outlet.

■ This Camera is designed only for use indoors. Do not use this Camera

out of doors.

■ Do not leave the Camera under direct sunlight or by heater, or the

Camera may be discolored, or damaged.

■ Do not place the Camera in any humid, dusty, windy or vibrating

location. Use the Camera in the following environmental condition:

Temperature: (Recommended) 

-10°C to 40°C 

(Working) -10°C to 50°C

Humidity:

30% ~ 90% (Non condensing)

■ Use a soft, dry cloth for cleaning. Do not use any volatile solvent, such

as thinner or benzin.

■ Do not directly point the camera lens into the sun, or the camera may be

damaged.

■ This Camera is designed only for installation to the ceiling.

When installing this Camera, use only the dedicated fixing plate, refer to

the pages 11 to 15 of this manual, and carefully check the safety, such

as falling prevention.

■ Exclusions

• We will not be liable for any damage arising out of or resulting from acts of

God (including earthquakes, floods, and lightning), fires, accidents, conducts

or other accidents by third parties, or your misuse, whether intentional or

unintentional, or use of the product under undesired conditions.

• We will not be liable for any incidental damage to the use of the product

(including loss of business profit, interruption of business, and change or loss

of records).

• We will not be liable for any damage arising out of or resulting from failure to

observe the instructions stated in the operation manual for the product.

- 3 -

HANDLING PRECAUTIONS