Samsung BD-C6900 Mode D'Emploi

English

05
Setup

Press the RETURN button on your remote.
Run a Network Test to ensure the player has 

connected to your network (See page 43).

Wireless Network

You can setup the wireless connection three ways:

Using PBC (WPS)

Using the Auto Network Search function.

Manually.

Each method is described below.

- PBC (WPS)
The easiest way to set up the wireless network 

connection is using the PBC (WPS) function. 

If your wireless router has a PBC (WPS) button, 

follow these steps:

In the Network Settings menu, press the ▲▼ 

buttons to select Network Setting, and then 

press the ENTER button. 

The Internet Protocol Setup screen appears.
Press the RED (A) button on the remote 

control.
Press the PBC (WPS) button on your router 

within two minutes. Your player displays the 

Network Selection Screen, and automatically 

acquires all the network setting values it 

needs and connects to your network. When 

it is done, it displays an OK button. Press the 

ENTER button on your remote.
After the network connection is set up, press 

the RETURN button to exit the Network 

Setting screen.

9.
10.

•

•

•

1.

2.

3.

4.

- Auto Network Search
Most wireless networks have an optional security 

system that requires devices that access the 

network to transmit an encrypted security code 

called an Access or Security Key. The Security 

Key is based on a Pass Phrase, typically a word 

or a series of letters and numbers of a specified 

length you were asked to enter when you set up 

security for your wireless network. If you use this 

method of setting up the network connection, and 

have a Security Key for your wireless network, 

you will have to enter the Pass Phrase during the 

setup process.

Setting Up the Network Connection

To set up the wireless connection using Auto 

Network Search, follow these steps:

In the Network Settings menu, press the ▲▼ 

buttons to select Network Setting, and then 

press the ENTER button. 

The Internet Protocol Setup screen appears.
Press the ▲▼ buttons to select the Internet 

Protocol Setup, and then press the ENTER 

button.
Press the ▲▼ buttons to select Auto or 

Manual, and then press the ENTER button.
If you selected Auto, press the ▲ button to 

go to Select a Network, and then press the 

ENTER button. 

The Network function searches for available 

wireless networks. 

When done, it displays a list of the available 

networks.



1.

2.

3.

4.

Network Setting

Select a Network 

: Not Selected

Internet Protocol Setup 

: Auto 

IP Address 

:  0   0   0   0  

Subnet Mask 

:  0   0   0   0

Gateway 

:  0   0   0   0

DNS   

: Auto

DNS Server 

:  0   0   0   0

 PBC(WPS)  > Move  " Enter  ' Return