Samsung BD-D5300 Mode D'Emploi

English

Case 1 : Connecting to a TV with an HDMI Cable - Best Quality 
(Recommended)

Using an HDMI cable, connect the 

1. HDMI 

OUT terminal on the rear of the player to the HDMI IN 

terminal of your TV.

Turn on the 

2. 

player and TV.

Press the input selector on your TV remote control until the HDMI signal from the 

3. 

player appears on 

your TV screen.

✎ 

NOTE

An HDMI cable outputs digital video/audio, so you don’t need to connect an audio cable. 

 

▪

If the player is connected to your TV in

 

▪

 the HDMI 720p, 1080i, or 1080p output mode, you must use a High speed 

(category 2) HDMI cable.

HDMI outputs only a pure digital signal to the TV. 

 

▪

If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears on the screen.

Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual of your TV.

 

▪

When you connect the player to the TV using the HDMI cable for the first time or to a new TV, the HDMI output 

 

▪

resolution will be automatically set to the highest supported by the TV.

A long HDMI cable may cause a screen noise. 

 

▪

If this occurs, set Deep Color to Off in the menu.

If you use HDMI-to-DVI cable to connect to your display device, you must also connect the AV Out or Digital Audio Out 

 

▪

to your display device or an audio sytem to hear audio.

If both HDMI and Video out are connected at the same time, only the HDMI signal is outputed.

 

▪

Connections

HDMI cable

(not included for  BD-D5300)