Samsung HT-BD1250 Mode D'Emploi
1
ENG
●
CONNECTIONS
Connecting The Speakers
Press down the terminal tab on the back of the speaker.
Insert the black wire into the black terminal (–) and the red wire into
the red (+) terminal, and then release the tab.
the red (+) terminal, and then release the tab.
Connect the connecting plugs to the back of the Blu-ray Home
Theater by matching the colors of the speaker plugs to the speaker
jacks.
Theater by matching the colors of the speaker plugs to the speaker
jacks.
How to Install the Speaker on the Stand (HT-BD1252/HT-BD1255)
Turn the STAND upside-down and connect it
to the STAND BASE.
to the STAND BASE.
Insert fi ve small SCREWS into the fi ve holes
marked with arrows using a screwdriver as
shown in the illustration.
marked with arrows using a screwdriver as
shown in the illustration.
Connect upper SPEAKER to the assembled STAND.
Insert another large SCREW into the hole on the
rear of the speaker marked with arrow using
a screwdriver.
rear of the speaker marked with arrow using
a screwdriver.
1.
.
3.
1.
.
3.
.
Black
Red
Front Speaker (R)
Center Speaker
Subwoofer Speaker
Rear Speaker (R)
Rear Speaker (L)
Front Speaker (L)
HT-BD1250
STAND BASE
STAND
1
3
HT-BD1250_XAC_0409-1.indd 21
2009-04-09 �� 7:27:34