Samsung HT-BD1250 Mode D'Emploi
30
Connections
CONNECTING AUDIO FROM EXTERNAL COMPONENTS
OPTICAL : Connecting an External Digital Component
Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box).
Connect the Digital Input (OPTICAL 1 or OPTICAL 2) on the main unit to the Digital Output of the
external digital component.
Press the D.IN button on the remote control to select D.IN 1 or D.IN 2 input.
Press the D.IN button on the remote control to select D.IN 1 or D.IN 2 input.
You can also use the FUNCTION button on the main unit.
The mode switches as follows : BD/DVD ➞ D.IN 1 ➞ D.IN 2 ➞ AUX ➞ FM.
The mode switches as follows : BD/DVD ➞ D.IN 1 ➞ D.IN 2 ➞ AUX ➞ FM.
To see video from your Cable Box/Satellite receiver, you must connect it's video output
to a TV.
This system supports Digital sampling frequencies of 32 kHz of higher from external digital
components.
This system supports only DTS and Dolby digital audio, MPEG audio which is bitstream
cannot be supported.
to a TV.
This system supports Digital sampling frequencies of 32 kHz of higher from external digital
components.
This system supports only DTS and Dolby digital audio, MPEG audio which is bitstream
cannot be supported.
1.
.
•
M
Optical Cable
(not supplied)
HT-BD1250_XAC_0409-1.indd 30
2009-04-09 �� 7:27:53