Samsung st200 Manuel D’Utilisation
Appendixes
130
Error messages
When the following error messages appear, try these remedies.
Error message
Suggested remedies
Device
disconnected.
disconnected.
Network connection disconnected while
transferring photos. Select a TV Link device
again.
transferring photos. Select a TV Link device
again.
File Error
Delete the damaged file or contact a service
center.
center.
File system not
supported.
supported.
Your camera does not support the FAT file
structure of the inserted memory card. Format
the memory card on the camera.
structure of the inserted memory card. Format
the memory card on the camera.
Initialization failed.
•
Turn on TV Link enabled devices on the
network.
network.
•
The camera has failed to locate a TV Link-
enabled device.
enabled device.
Invalid password.
The password for transferring files to another
camera is wrong. Enter the correct password
again.
camera is wrong. Enter the correct password
again.
Low Battery
Insert a charged battery or recharge the battery.
Memory Full
Delete unnecessary files or insert a new memory
card.
card.
Error message
Suggested remedies
Card Error
•
Turn off your camera, and then turn it on
again.
again.
•
Remove your memory card, and then insert
it again.
it again.
•
Format your memory card.
Card not
supported.
supported.
The inserted memory card is not supported
by your camera. Insert a microSD, microSDHC,
or microSDXC memory card.
by your camera. Insert a microSD, microSDHC,
or microSDXC memory card.
Connection failed.
•
The camera cannot connect to the network
using the selected access point. Select
another AP and try again.
using the selected access point. Select
another AP and try again.
•
The camera has failed to connect to the other
camera. Try connecting again.
camera. Try connecting again.
DCF Full Error
File names do not match the DCF standard.
Transfer the files from the memory card to your
computer and format the card. Then, open the
Settings menu and select
Transfer the files from the memory card to your
computer and format the card. Then, open the
Settings menu and select
File No.
→ Reset.
(p. 127)