Samsung ppm63m7 Mode D'Emploi

© 2007 Samsung Electronics Co., Ltd. All rights reserved. 



 

Do not display a still image (such as on a video game or when hooking up a PC to this PDP Display) 

on the plasma PDP Display panel for more than 2 hours as it can cause screen image retention.  

This image retention is also known as “screen burn”. To avoid such image retention, reduce the 

degree of brightness and contrast of the screen when displaying a still image.



 

The PDP Display can normally operate only under 2000m(6562 feet) in height. It might abnormally 

function at a place over 2000m(6562 feet) in height, so do not install and operate there.



 

The top side of the product may be hot after long periods of use as heat dissipates from the panel 

through the vent hole in the upper part of the product.

This is normal and does not indicate any defect or operation failure of the product.

However, children should be prevented from touching the upper part of the product.



 

A ‘cracking’ noise may occur when the product contracts or expands due to a change of surrounding 

environment such as temperature or humidity. This is normal and not a defect of the unit.



 

The PDP Display uses a panel consisting of 1,230,000(SD-level) to 3,150,000(HD-level) pixels which 

require sophisticated technology to produce. However, there may be a few bright or dark pixels on 

the screen. These pixels will have no impact on the performance of the product.



 



 

Watching the PDP Display in 4:3 format for a long period of time may leave 

traces of borders displayed on the left, right and center of the screen caused by 

the difference of light emission on the screen.

Playing a DVD or a game console may cause similar effect to the screen.

Damage caused by the above effects are not covered by the Warranty.



 

Displaying still images from Video games and PC for longer than a certain period of time may 

produce partial afterimages.

To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images for a long 

time.



 

- Warranty does not cover any damage caused by image retention.

- Burn-in is not covered by the warranty.



 

Be sure to contact an authorized service center when installing your PDP Display in a location with 

heavy dust, high or low temperatures, high humidity, chemical substances or where it will be operated 

for 24 hours a day such as in an airport, train station etc.

Failure to do so may cause a serious damage to your PDP Display.

Installing the product in an airtight place may shorten the lifetime of the product.

BN68-01364A-02Eng_1009.indd   2

2007-10-09   ¿ÀÈÄ 2:23:44