Samsung 400mx 400mxn 460mx 460mxn Manuel D’Utilisation
Connecting to a Camcorder
1.
Locate the A/V output jacks on the camcorder. They are usually found on the side or back of the
camcorder. Connect a set of audio cables between the AUDIO OUTPUT jacks on the camcorder
and the AV AUDIO IN [L-AUDIO-R] on the LCD Display .
camcorder. Connect a set of audio cables between the AUDIO OUTPUT jacks on the camcorder
and the AV AUDIO IN [L-AUDIO-R] on the LCD Display .
2.
Connect a video cable between the VIDEO OUTPUT jack on the camcorder and the AV IN
[VIDEO] on the LCD Display .
[VIDEO] on the LCD Display .
3.
Select AV for the Camcorder connection using the Source button on the front of the LCD Display
or on the remote control.
or on the remote control.
4.
Then, start the Camcorders with a tape inserted.
Note
The audio-video cables shown here are usually included with a Camcorder. (If not, check your local
electronics store.) If your camcorder is stereo, you need to connect a set of two cables.
electronics store.) If your camcorder is stereo, you need to connect a set of two cables.
Connecting Using a HDMI Cable
Note
•
Input devices such as digital DVD are connected to the HDMI terminal of the LCD Display using
the HDMI cable.
the HDMI cable.
•
You cannot connect a PC to the HDMI terminal.
Connections
32