Samsung 460ex 550ex Mode D'Emploi

→ , → [0~9]

• ID Setup

Assigns distinctive IDs to the SET.

• ID Input

Use to select the transmitter functions of the individual SET. Only a SET where the ID

corresponds to the transmitter setting becomes activated.

• MDC Connection

Selects a port to receive the MDC inputs from.

• Communicates with the MDC via a Serial MDC cable.

• Communicates with the MDC via an RJ 45 MDC cable.

• Network Setting

• IP Setting : Manual, Auto

• IP Address : Manually enter the IP Address if IP Setting is set to Manual.

• Subnet Mask : Manually enter the Subnet Mask if IP Setting is set to Manual.

• Gateway : Manually enter the Gateway if IP Setting is set to Manual.

MagicInfo

Available Modes

•

Component

•

HDMI

•

MagicInfo

Note

For an EX model,

• MagicInfo can only be enabled when a network box is connected.

• The HDMI port and network box cannot be connected at the same time.

Note

• The remote control can be used to select MagicInfo. However, it is recommended to use

a separate USB keyboard to utilize MagicInfo fully.

• For MagicInfo in Device mode, moving external devices while booting may cause errors.

Set up external devices only if the LCD Display turns on.

Adjusting the LCD Display