Samsung 510n 512n 515v 710n 710t 711t 712n 910n 910t 912n 912t 915v Mode D'Emploi

 
 

  

  If this is the case, adjust the Brightness and Contrast by using the 
OSD menu. 

When OSD is not on the screen, Push the button to adjust brightness.

Adjust items in the menu.

Activate a highlighted menu item. /  
Push the 'Source', then Selects the Video signal while the OSD is off. 
(When the Source button is pressed to change the input mode, a 
message appears in the center of the screen displaying the current mode 
-- analog or digital input signal.) Note : If you select the Digital mode, 
you must connect your monitor to the graphic card's port using the DVI 
cable. 

Use this button for auto adjustment direct access.

Use this button for turn the monitor on and off.

This light glows green during normal operation, and blinks green once as 
the monitor saves your adjustments. 

See 

PowerSaver

 described in the manual for further information regarding power saving functions. 

For energy conservation, turn your monitor OFF when it is not needed, or when leaving it 
unattended for long periods.

 
 

 
 

  

  

 

 

(The configuration at the back of the monitor may vary from product to product.)  

  

 

Connect the power cord for your monitor to the power port on the back of 
the monitor.

Connect the DVI Cable to the DVI Port on the back of your Monitor. 

Connect the signal cable to the 15-pin, D-sub connector on the back of your 
monitor. 

See 

Connecting the Monitor

 for further information re garding cable connections.

>>Click here to see an animation clip