Samsung 510n 510t 512n 515v 701t 710n 710t 711t 712n 910n 910t 912n 912t 913n 915v Mode D'Emploi

x 1024 60Hz" message appears for 
one minute and then disappears.  
Please change to the recommended 
mode during this one-minute period.  
(The message is displayed again if the 
system is rebooted.) 

There is no image on the screen.  
Is the power indicator on the monitor 
blinking at 1 second intervals?

The monitor is in PowerSaver mode. 
 
press a key on the keyboard to activate 
the monitor and restore the image on 
the screen.  
 
If there is still no image, press the 

'Source' button.  
Then press any key on the keyboard 
again to activate the monitor and 
restore the image on the screen.

Connected using the DVI cable?

You may get a blank screen if you boot 
the system before you connect the DVI 
cable, or disconnect and then 
reconnect the DVI cable while the 
system is running as certain types of 
graphic cards do not send out video 
signals. 
Connect the DVI cable and then reboot 
the system.

Is the screen displaying only one color 
as if looking at the screen through a 
cellophane paper? 

Check the signal cable 
connection.Make sure the video card is 
fully inserted in it's slot.

Have the screen colors become strange 
after running a program or due to a 
crash between applications?

Reboot the computer.

Has the video card been set properly?

Set the video card by referring to the 
video card manual. 

Have you changed the video card or 
the driver?

Adjust screen image position and size 
using the OSD.

Have you adjusted the resolution or 
frequency to the monitor?

Adjust the resolution and frequency at 
the video card.  
(Refer to the 

Preset Display Modes

).

Have you adjusted the resolution or 
frequency on the monitor?

Adjust the resolution and frequency of 
the video card.  
(Refer to the 

Preset Display Modes

).

Is the frequency properly adjusted 
when checking the Display Timing on 
the menu?

Adjust the frequency properly by 
referring to the video card manual and 
the 

Preset Display Modes

.  

(The maximum frequency per 
resolution may differ from product to 
product.) 

Have the Windows colors been set 
properly? 

Windows ME/2000/XP: 
Set the colors properly at the Control 
Panel → Display → Settings. 

Has the video card been set properly?

Set the video card by referring to the 
video card manual. 

Have you installed the monitor driver?

Install the monitor driver according to 
the 

Driver Installation Instructions

.

See the video card manual to see if the 
Plug & Play (VESA DDC) function can 

Install the monitor driver according to 
the 

Driver Installation Instructions

.