Samsung 721n Mode D'Emploi
Play monitor, find 'Plug and Play
monitor' by searching new
Hardware.
monitor' by searching new
Hardware.
MagicTune™ is an additional
software for the monitor. Some
software for the monitor. Some
graphic cards may not support your
monitor. When you have a problem
monitor. When you have a problem
with the graphic card, visit our
website to check the compatible
website to check the compatible
graphic card list provided.
http://www.samsung.com/monitor/MagicTune
MagicTune™
doesn't work
properly.
doesn't work
properly.
Have you changed your PC or
video graphic card?
video graphic card?
Download the latest program. The
program can be downloaded
program can be downloaded
http://www.samsung.com/monitor/MagicTune
.
Did you install the program?
Reboot the computer after installing the
program for the first time. If a copy of the
program is already installed, remove it,
reboot the computer, and then install the
program is already installed, remove it,
reboot the computer, and then install the
program again. You need to reboot the
computer for it to operate normally after
computer for it to operate normally after
installing or removing the program.
Visit the MagicTune™ website and download the installation software for MagicTune™
MAC.
MAC.
Check the following items if there is trouble with the monitor.
1. Check if the power cord and the video cables are properly connected to the computer.
2. Check if the computer beeps more than 3 times when booting.
2. Check if the computer beeps more than 3 times when booting.
(If it does, request an after-service for the main board of the computer.)
3. If you installed a new video card or if you assembled the PC, check if the installed the adapter
(video) driver and the monitor driver.
4. Check if the scanning ratio of the video screen is set at 56Hz ~ 75Hz.
(Do not exceed 75Hz when using the maximum resolution.)
5. If you have problems in installing the adapter (video) driver, boot the computer in Safe Mode,
remove the Display Adapter at the "Control Panel→System→Device Administrator" and then
reboot the computer to reinstall the adapter (video) driver.
reboot the computer to reinstall the adapter (video) driver.
If problems repeatedly occur,
contact an authorized Service Center
.
Q & A
Question
Answer
How can I change the
frequency?
frequency?
Frequency can be changed by reconfiguring the video card.
Note that video card support can vary, depending on the version
Note that video card support can vary, depending on the version
of the driver used. (Refer to the computer or the video card
manual for details.)
manual for details.)
How can I adjust the resolution? Windows ME/XP/2000 : Set the resolution at the Control
Panel→Display→Settings.
* Contact the video card manufacturer for details.
* Contact the video card manufacturer for details.
How can I set the Power Saving
function?
Windows ME/XP/2000 : Set the function at BIOS-SETUP of the
computer or the screen saver. (Refer to Windows/Computer
Manual).
Manual).
How can I clean the outer
case/LCD Panel?
case/LCD Panel?
Disconnect the power cord and then clean the monitor with a soft
cloth, using either a cleaning solution or plain water.
cloth, using either a cleaning solution or plain water.