Samsung {740b plus} {940b plus} Mode D'Emploi

5. If you have problems in installing the adapter (video) driver, boot the computer in Safe Mode,

remove the Display Adapter at the "Control Panel→System→Device Administrator" and then
reboot the computer to reinstall the adapter (video) driver.

If problems repeatedly occur,

contact an authorized service center

Q & A

Question

Answer

How can I change the
frequency?

The frequency can be changed by reconfiguring the video card.

Note that video card support can vary, depending on the version
of the driver used. (Refer to the computer or the video card
manual for details.)

How can I adjust the resolution? Windows ME/XP/2000 : Set the resolution at the Control

Panel→Display→Settings.

* Contact the video card manufacturer for details.

How can I set the Power Saving

function?

Windows ME/XP/2000 : Set the function at BIOS-SETUP of the

computer or the screen saver. (Refer to Windows/Computer
Manual).

How can I clean the outer
case/LCD Panel?

Disconnect the power cord and then clean the monitor with a soft
cloth, using either a cleaning solution or plain water.

Do not leave any detergent or scratches on the case. Do not let
any water enter the monitor.

Self-Test Feature Check

Self-Test Feature Check

Warning Messages

Environment

Useful Tips

Your monitor provides a self test feature that allows you to check whether your monitor is
functioning properly.

Self-Test Feature Check

1. Turn off both your computer and the monitor.

2. Unplug the video cable from the back of the computer.
3. Turn on the monitor.

If the monitor is functioning properly, you will see a box in the illustration below.

This box appears during normal operation if the video cable becomes disconnected or
damaged.

4. Turn off your monitor and reconnect the video cable; then turn on both your computer and the

monitor.
If your monitor screen remains blank after using the previous procedure, check your video
controller and computer system; your monitor is functioning properly.