Samsung 941mg 941mw Manuel D’Utilisation

It's used to exchange the numbers of two channels.  

If channel name information is broadcast when you store the channels either 
manually or automatically, the names are assigned to the channels directly. 
You can however change these names or assign new names as required. 

Due to weak signals or an incorrect antenna configuration, some of the 
channels may not be tuned correctly.  

 

Available Mode 

 : PC / DVI

 : TV

 : Ext.

 : AV

 : S-Video

 : Component

The default setting may be different depending on the selected Input Mode (input signal 
SOURCE selected in External Input List) and the selected resolution.  

You can choose one of 8 languages.  

 

Note : The language chosen affects only the language of the OSD.  
It has no effect on any software running on the computer. 

Turns the monitor off after a pre-determined period of time.  
1) Off    2) 30    3) 60    4) 90    5) 120    6) 150    7) 180  
 

Transparency Changes the opaqueness of the background of the OSD. 

3) Low 

4) Opaque 

If no signal is being received or the signal is very weak, a blue screen 
automatically replaces the noisy picture background. If you wish to continue 
viewing the poor picture, you must set the "Blue screen" mode to "Off".