Samsung 941mg 941mw Manuel D’Utilisation

Page de 56
466 x 406 x 217 mm / 18.3 x 16.0 x 8.5 inch / 6.2 kg / 13.7 lbs (With Stand) 
466 x 371 x 66 mm /18.3 x 14.6 x 2.6 inch (Without Stand) 
VESA Mounting Interface
100 mm X 100 mm
Environmental considerations
Operating
Temperature: 50°F to 104°F(10°C to 40°C)  
Humidity: 10% to 80%, Non-condensing
Storage
Temperature: -4 °F ~113 °F(-20 °C ~ 45 °C)  
Humidity: 5% to 95%, Non-condensing
Plug and Play Capability
This monitor can be installed on any Plug & Play compatible system. The interaction of the monitor and the 
computer systems will provide the best operating conditions and monitor settings. In most cases, the monitor 
installation will proceed automatically, unless the user wishes to select alternate settings.
Dot Acceptable
TFT LCD panel manufactured by using advanced semiconductor technology with precision of 1ppm(one 
millionth) above is used for this product. But the pixels of RED, GREEN, BLUE and WHITE color seem to be 
bright sometimes or some of black pixels could be seen. This is not from bad quality and you can use it 
without uneasiness. 
!
For example, the number of TFT LCD sub pixels contained in this product are 3,888,000. 
Note: Design and specifications are subject to change without prior notice.
Class B Equipment (Information Communication equipment for residential use) 
This product complies with the Electromagnetic Compatibility Directives for residential use and can be used in 
all areas including common residential areas.  
(Class B equipment emits less electromagnetic waves than Class A equipment.) 
 
 
 
 
PowerSaver
  
This monitor has a built-in power management system called PowerSaver. This system saves energy by 
switching your monitor into a low-power mode when it has not been used for a certain amount of time. The 
monitor automatically returns to normal operation when you press a key on the keyboard. For energy 
conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long periods. The 
PowerSaver system operates with a VESA DPMS compliant video card installed in your computer. Use the 
software utility installed on your computer to set up this feature. 
 
State
 
Normal Operation
 
Power saving mode 
Power off 
 
Power Indicator
Green
Green, Blinking
Black
Power Consumption
Analog/Digital 
Less than 55 W
Analog/Digital 
Less than 2 W 
Less than 2 W
 
 
 
 
Preset Timing Modes
 
If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will 
be adjusted automatically. However, if the signal differs, the screen may go blank while the power LED is on. 
Refer to the video card manual and adjust the screen as follows.  
 
Table 1. Preset Timing Modes 
Display Mode
Horizontal 
Frequency 
(kHz)
Vertical 
Frequency 
(Hz) 
Pixel Clock 
(MHz) 
Sync Polarity 
(H/V)